| Bell Mouth Strain Relief
Bushings SR |
| • |
Fixing and insulation of the various power supply cord. |
| • |
Bushings for the electric noise countermeasure bending test. |
| • |
Material: 66 Nylon |
| • |
Available to use the temperature up to 105°C. |
| • |
Withstand tensile strength test up to 16kg. |
| • |
Wide-range in kinds and size. |
|
 |
| Strain Relief Bushings
SR |
| • |
Wide range in kinds and size. |
|
|
| Right Angle Strain Relief
Bushings SR |
| • |
If right-angle type bushings are used, cord can parallel is curved at right with panel by bending cord at the right angle. |
|
|
| • |
Insulation and protection such as various wire, cable, rope
and so on. |
| • |
Suitable for every wire, and cable because of 46 kinds of snap and bushings. |
| • |
Withstands a push return test about 16kg. |
| • |
Can insert and mount with finger tip, no need tool. |
|
|
| • |
Since overall length is shorter than SB snap bushings, these bushings are suitable for the place with a limited internal clearance. |
|
|
| • |
Use by the same application as the snap bushings. |
| • |
Since there is slit on the side of bushings can insert bushing from the slit after putting cord on the mount hole. |
|
|
| • |
Hold the different size of cord, tube and shaft into the center and insulate and protect cord. |
|
|
| • |
These bushings do the same function as the Strain Relief Bushings when inserting wire, open the inner diameter and close this inner diameter just after inserting panel. |
|
 |
Bushings (HEYCO)
